Soccer Ball History

old leather soccer ball History of the Soccer Ball

Soccer has been played in various forms though out history.  Many sites on the world wide web have information on the history of football or soccer and who invented the original soccer ball.  Of course, here at Soccer Ball World, we will concentrate on the history and evolution of the soccer ball.

Click on the titles below to go directly to that section:

Early Soccer Ball History

Through out history, humans have enjoyed kicking a ball or something like a ball. South American Indians were known to use a light elasticized ball. However; rubber was not to be practically manufactured until a few thousand years later. 

According to historical references and legend, early balls ranged from human heads, stitched up cloth, animal and human skulls to pig or cow bladders.

During the Ts’in and Han Dynasties (255 BC-220 AD), the Chinese played ‘tsu chu’, in which animal-skin balls were dribbled through gaps in a net stretched between two poles. Certain ancient Egyptian rites are said by historians to have similarities with football, and both the ancient Greeks and Romans also played a game that entailed carrying and kicking a ball.

According to pre-medieval legend, an entire village would kick a skull along a path to a nearby village square.  The opposing village would in turn attempt to kick the skull to the first village’s square.  Wow, that probably caused more riots than in modern soccer games. 

A Medieval custom was to take pig bladders used from live stock killed in preparation for winter sustenance and inflate them. They would play a game using their feet and hands to keep the “ball” in the air. Sounds like hacky sack to me.

The animal bladder balls were eventually covered with leather for better shape retention.

Balls in 1800’s

In 1836 Charles Goodyear patented vulcanized rubber. Prior to this, balls were dependant on the size and shape of the pig’s bladder. The more irregular the bladder, the more unpredictable the behavior of the ball was when kicked. However; it would not be until the twentieth century until most balls were made with rubber bladders.

In 1855, Charles Goodyear designed and built the first vulcanized rubber soccer balls (footballs).  The following picture shows the Charles Goodyear ball that is on display at the National Soccer Hall of Fame which is located in Oneonta, NY, USA.

Oldest soccer ball History of the Soccer Ball

For more information on the Charles Goodyear oldest soccer ball, click here

In the 1862, H.J. Lindon developed one of the first inflatable rubber bladders for balls.  Tragically his wife previously died from lung disease. Reportedly from blowing up many hundreds of pig’s bladders.  Lindon was probably inspired to develop the inflatable rubber bladder because of the ill effects of blowing up pig’s bladders.  The balls with the rubber bladders ensured that the ball remained hard and oval. Lindon also claimed to have invented the rugby ball but did not patent the idea.  In those days, the round ball was preferred because it was easier to kick and the oval ball was easier to handle.

In 1863 the newly formed English Football Association met to hammer out the laws of the game.  No description of the ball was offered in the first set of rules.  When the rules were revised in 1872 it was agreed that the ball “must be spherical with a circumference of 27 to 28 inches” (68.6 cm to 71.1 cm). That rule remains in today’s FIFA laws. Very little has ever been written about the ball, probably because it has remained very much the same over the years.  The official size and weight of the ball was first fixed in 1872.  It was changed ever so little in 1937 when the official weight was increased from 13-15 oz to 14-16 oz. The Encyclopedia of Association Football (first published in England in 1956) says as follows “According to the Laws of Football, the ball must be spherical with an outer casing of leather or other approved materials.  The circumference shall not be more than 28 in., nor less than 27 in, while the weight at the start of the game must not be more that 16 oz., nor less than 14 oz.” The Laws of the Game as published in 2001 say exactly the same thing as to size and weight. What has changed drastically over the last 30 or so years is the material the ball is made of and the shape of the panels that make up the ball.

ball FA CUP 1893 History of the Soccer Ball

Match Ball used in the FA Cup Final of 1893

Wolves 1 Everton 0

Mass production of soccer balls started as a direct consequence of the English Football League that was founded in 1888.  Mitre and Thomlinson’s of Glasgow were two of the first companies to mass produce soccer balls during that time.  They touted that the key element in a quality football was how well it could retain it’s shape.  Strength of the leather and the skills of the cutters and stitchers were the main factors in producing a football that would retain it’s shape. The top grade covers were made with leather from the rump of a cow while lower quality balls were made from the shoulder.  Advances in ball design came with the development of interlocking panels instead of the previously used leather sections that met at the north and south poles of the ball. The balls were then produced with a more acceptable round shape.

Soccer Balls in the 1900’s

Barcelona 1899 ball History of the Soccer Ball

Official FC Barcelona Museum 1899 Eight Panel Ball

1900 ball History of the Soccer Ball

1900 Eight Panel Ball – Picture from Jacques Barralon  

1910 Soccer Ball

Oldball 1910 spalding History of the Soccer Ball

old leather ball History of the Soccer Ball


By the 1900’s bladders were made with stronger rubber and could withstand heavier pressure.  Most balls produced by that time used rubber bladders. The balls were made from inner tubes covered with heavy brown leather.  These balls would bounce easier and yet could be kicked. Most balls had a tanned leather cover with eighteen sections stitched together arranged in six panels of three strips each.  Each section was stitched together by hand with five-ply hemp and a small lace-up slit was on one side. All of the stitching was done with the ball cover inside out.  Once completed, the cover was reversed with the stitching on the inside.  An un-inflated bladder was then inserted through the slit.  A long stem neck (aperture) extending from the bladder was used to inflate the ball.  Once inflated, the tube was inserted through the 15 cm slit and then the opening was laced up tight. You can imagine how often that these soccer balls had to re-inflated.  Even during a game.

These balls were good for kicking but was painful when heading due to the heavy stitching and the water absorption characteristics of the leather. Water absorption of the leather during rain made the ball very heavy and caused many head injuries.  Other problems of the old leather balls were the various quality of cowhides used. Footballs varied in thickness and quality and the leather often degraded during the match.

Old Soccer ball Spalding 1929 History of the Soccer Ball

1929 Soccer Ball

Old Soccer ball 1933 History of the Soccer Ball
Old Soccer ball 1933

english ball old History of the Soccer Ball


Old Soccer ball 1937 History of the Soccer Ball

1937 Soccer Ball

The soccer ball may have even played a part in the outcome of the first world cup in 1930.  Argentina and Uruguay could  not agree on which ball to use.  So they decided to use an Argentinean ball the first half and a ball supplied by Uruguay in the second half.  As it turned out, Argentina was ahead at halftime 2-1using their soccer ball.  However; Uruguay came back to win the match in the second half 4-2 using their ball!

Click on the picture below see a larger picture of the ball used in the final match of the first world cup and cool USA and Uruguay first world cup team pictures.

Ball 1930 WC small History of the Soccer Ball

1930 World Cup Soccer Ball of “Tiento”

During World War II there were further production enhancements. The addition of a carcass made of strong cloths between the bladder and outer cover made controlling the shape easier, provided damping, and made the ball stronger.  However; soccer balls played a crucial role in the outcome of matches due to the ball actually bursting during a game. The reason for the low quality balls just after World War II was blamed on the poor quality of the leather covers. 

Water absorption was improved by using synthetic paints and other non-porous materials to coat the leather. Also, a new type of valve was invented that eliminated the laced slit on soccer balls.

Old Ball 1950 History of the Soccer Ball

1950 Soccer Ball

In 1951 a white ball was first permitted to help spectators see the ball easier with the advent of floodlights. White soccer balls were un-officially used as early as 1892. The leather was simply white washed to produce the white ball. Orange balls were also first introduced in the 1950’s to help see the ball in the snow.

Football 1950 History of the Soccer Ball
Football_1950 B History of the Soccer Ball

1950 era 18 panel ball (pictures from Francisco Aquino)

Different countries favored different types of soccer balls in the early days of international soccer.  This caused much controversy. FIFA standardized the size, weight and type of balls with the introduction of an international board. 

Page 2 of the history of the soccer ball: